The KTM triangle stand, also known as a kickstand or side stand, is designed to provide support and stability to your motorcycle when parked. Here's a step-by-step guide on how to use a KTM triangle stand:
Locate the Stand: Identify the triangle stand on your KTM motorcycle. It is typically positioned on the left side of the bike, near the footpeg area.
Engage the Stand: To engage the triangle stand, start by parking your motorcycle on a level surface. Ensure that the bike is in neutral and the engine is turned off. Locate the stand's foot or pad, which is the portion that contacts the ground.
Lower the Stand: Gently push down on the stand's foot with your foot or hand to extend it fully. Apply pressure until the stand reaches the ground and the bike leans slightly to the left.
Stabilize the Motorcycle: Once the stand is engaged and the bike is leaning on it, make sure the motorcycle is stable. Ensure that it is not at risk of tipping over by giving it a gentle push or lean from different angles. The bike should remain upright and secure.
Parking the Motorcycle: With the stand fully engaged, you can now park your motorcycle. Make sure it is in a safe location and won't obstruct any pathways or create hazards for others.
Retracting the Stand: When you're ready to ride again, ensure that the ground surface is clear and the area around the motorcycle is safe. Grip the handlebars firmly, apply gentle pressure on the footpeg with your foot, and lift the bike upright to retract the stand.
Note: It's important to remember that the KTM triangle stand is intended for temporary parking and should not be relied upon for long-term storage or maintenance work. For extended periods of parking or maintenance, it's advisable to use a dedicated motorcycle stand or support device.
Always consult your motorcycle's owner's manual for specific instructions and guidelines regarding the use of the triangle stand, as different KTM models may have slight variations in their stand design and operation.