To start a 200cc motorcycle, you can follow these general steps:
Preparation:
- Ensure that the motorcycle is in neutral gear. The neutral indicator on the instrument panel should be illuminated.
- Make sure the kickstand is up (if your motorcycle has one) or the side stand switch is engaged.
Ignition:
- Insert the key into the ignition switch, typically located on the right-hand side of the handlebars.
- Turn the key to the "ON" position. You may see various lights and indicators on the instrument panel illuminate.
Fuel:
- If your motorcycle has a fuel petcock (fuel valve), ensure it is set to the "ON" or "RES" (reserve) position to allow fuel to flow to the engine.
Starting the Engine:
- Locate the engine start button, usually located on the right-hand side handlebar control cluster.
- With the clutch lever pulled in (if your motorcycle has a manual transmission) and the throttle closed, press the engine start button.
Starting Procedure:
- For motorcycles with a carbureted engine: While pressing the start button, you may need to slightly open the throttle (twist the throttle grip) to provide a small amount of fuel to the engine. Once the engine fires up, release the throttle.
- For motorcycles with a fuel-injected engine: Simply press the start button without opening the throttle. The fuel injection system will handle the fuel delivery.
Allow the Engine to Warm Up:
- After the engine starts, allow it to idle for a short period to warm up. This allows the engine oil to circulate and ensures smoother operation.
Ride:
- Once the engine is warmed up and you're ready to ride, you can disengage the clutch (if it's a manual transmission) and gradually apply throttle to start moving.
It's important to consult your motorcycle's owner's manual for specific starting instructions and any additional steps or considerations particular to your motorcycle model. Additionally, ensure that you're familiar with the controls, safety features, and any specific starting procedures recommended by the manufacturer.