Drying your motorcycle after it rains is important to prevent water spots, corrosion, and other potential issues. Here's a step-by-step guide on the best way to dry your motorcycle after it gets wet:
Start in a shaded area: Move your motorcycle to a shaded spot to avoid direct sunlight, as it can cause water to evaporate quickly and leave behind water spots.
Use a soft, absorbent cloth or microfiber towel: Avoid using rough or abrasive materials that could potentially scratch the bike's surface. A soft cloth or microfiber towel is ideal for drying.
Start with the windshield and mirrors: Begin by gently wiping down the windshield and mirrors to remove excess water. Use a blotting motion rather than rubbing, as this reduces the risk of scratching.
Dry the bodywork: Move on to the bodywork, working in sections. Pat the cloth or towel on the surface, absorbing water as you go. Again, avoid rubbing vigorously.
Dry hard-to-reach areas: Pay attention to areas where water tends to accumulate, such as under the seat, around the headlights, or in crevices. Use a towel or cloth to reach these areas, or utilize compressed air to blow the water out.
Dry the wheels and tires: Make sure to dry the wheels thoroughly, including the spokes, rims, and tires. Use a separate cloth or towel for this purpose.
Check for water in crevices: Inspect areas where water can collect, such as the fuel cap, handlebar switches, and any other openings. Use a clean cloth or towel to remove any trapped moisture.
Consider using a blower or dryer: If you have access to a blower or a motorcycle dryer specifically designed for drying motorcycles, it can be helpful in removing water from hard-to-reach areas, crevices, and intricate parts.
Remember, take your time and be thorough when drying your motorcycle. Proper drying helps maintain the bike's appearance and prevents potential damage caused by water.