Starting a motorcycle with a flooded engine can be a bit challenging, but here are some steps you can follow to help resolve the issue:
Turn off the ignition: If you've been attempting to start the motorcycle with a flooded engine, turn off the ignition switch. This prevents any more fuel from entering the engine and worsening the flooding.
Locate the fuel shut-off valve: Motorcycles usually have a fuel shut-off valve, which is typically located near the fuel tank or on the fuel line. Turn the valve to the "Off" position to stop the flow of fuel.
Open the throttle: Twist the throttle fully open. This helps to clear excess fuel from the engine by allowing more air to enter.
Engage the choke: If your motorcycle has a choke lever, move it to the "Full" or "On" position. This reduces the amount of air entering the engine and increases the fuel-to-air ratio, making it easier to start.
Wait for a few minutes: Let the excess fuel evaporate from the engine by waiting for a few minutes. This allows the fuel to disperse and air to replace it.
Turn on the ignition: Turn on the motorcycle's ignition switch without engaging the starter button. This activates the electrical system.
Engage the starter: Once you've completed the previous steps, press the starter button to start the engine. Be prepared to give it a little throttle if necessary to help clear out the excess fuel.
Repeat the process if needed: If the engine doesn't start on the first attempt, you may need to repeat the steps. However, be cautious not to overdo it, as excessive attempts can drain the battery or cause other issues.
Remember, each motorcycle may have its own starting procedure, so consult your owner's manual for specific instructions or any additional steps recommended by the manufacturer. If you continue to experience difficulties starting the motorcycle, it's best to consult a professional mechanic for further assistance.