When facing a self-start issue in your Suzuki Access 125, it can be difficult to determine whether the problem lies with the battery or the self-start motor. Here are some steps you can take to diagnose the issue:
Check the battery voltage: Use a multimeter to measure the voltage of your scooter's battery. A fully charged battery should read around 12.6 to 12.8 volts. If the voltage is significantly lower, it may indicate a weak or discharged battery that needs recharging or replacement.
Test the battery connections: Ensure that the battery terminals are clean, tight, and free from corrosion. Loose or corroded connections can hinder the electrical flow and affect the self-start system. Clean the terminals and tighten them securely if needed.
Check the starter motor: If the battery voltage is sufficient, but the self-start is still not functioning, it may indicate a problem with the starter motor. To test the starter motor, you can try the following steps:
a. Ensure the scooter is in neutral and the ignition switch is turned on.
b. Press the self-start button and listen for any sounds coming from the starter motor.
c. If you hear a clicking sound but the motor does not turn, it could indicate a faulty starter motor.
Seek professional assistance: If you are unable to diagnose the issue or you suspect a problem with either the battery or starter motor, it is recommended to consult a qualified technician or visit an authorized service center. They will have the necessary expertise and equipment to further diagnose and resolve the specific issue with your scooter's self-start system.
Remember, it is always important to prioritize safety when working with electrical components. If you are unsure or uncomfortable performing any of the diagnostic steps, it is best to seek professional assistance to avoid any potential hazards.