To start a Royal Enfield Bullet motorcycle, follow these steps:
Ensure the motorcycle is in neutral: Make sure the motorcycle is in the neutral gear by confirming that the gear lever is in the middle position.
Fuel and Ignition: Ensure that there is sufficient fuel in the tank. Turn the ignition key to the "On" position. Some models may have an additional engine kill switch, usually located on the right handlebar. Make sure it is in the "Run" or "On" position.
Choke: If the engine is cold, engage the choke. The choke lever or knob is typically located on the left side of the motorcycle, near the carburetor or fuel injection system. Pull it all the way up to engage the choke.
Kickstart: The Royal Enfield Bullet features a kickstarter. Place your left foot on the kickstarter lever, which is located on the right side of the motorcycle. Firmly push down on the kickstarter lever with a smooth and strong motion. Repeat the kickstarting process until the engine starts.
Throttle: Once the engine starts, give a gentle twist to the throttle grip on the right handlebar to maintain idle speed. This will prevent the engine from stalling.
Warm-up: Allow the engine to warm up for a few minutes. During this time, you may need to adjust the choke gradually by pushing it down as the engine warms up and becomes less cold.
Riding: Once the engine has warmed up sufficiently, you can disengage the choke by pushing it all the way down. Gently engage the clutch lever, shift into first gear, and you're ready to start riding.
It's worth noting that the starting procedure may vary slightly depending on the specific model and year of the Royal Enfield Bullet. Always consult the owner's manual for precise instructions related to your motorcycle.