To replace the old Bullet Standard fuel tank monograms on new models, you can follow these general steps:
Obtain the New Monograms: Purchase the new Bullet Standard fuel tank monograms from an authorized Royal Enfield dealership or a reputable supplier. Ensure that you have the correct monograms for your specific model and year.
Prepare the Work Area: Find a well-ventilated and clean workspace to perform the replacement. It's a good idea to have some basic tools on hand, such as a screwdriver or socket wrench, to remove and reinstall the monograms.
Remove the Old Monograms: Carefully peel off the old monograms from the fuel tank. Apply gentle pressure and use a plastic scraper or your fingers to avoid scratching or damaging the tank's paintwork. If the monograms are adhesive-backed, they should come off easily.
Clean the Surface: Once the old monograms are removed, clean the surface of the fuel tank thoroughly. Use a mild detergent or soap solution and a soft cloth to remove any adhesive residue or dirt. Ensure that the tank is completely dry before proceeding.
Position the New Monograms: Align the new Bullet Standard monograms on the fuel tank in the desired location. Double-check their placement and orientation to ensure they are straight and in the correct position. Take your time to achieve the desired look.
Apply the New Monograms: Most monograms come with adhesive backing. Remove the protective backing paper or film from the adhesive side of the monogram. Carefully press the monogram onto the clean and dry surface of the fuel tank, starting from one end and working your way to the other. Apply even pressure to ensure proper adhesion.
Secure the Monograms (if required): Some monograms may require additional securing to prevent them from coming off over time. If provided, follow the manufacturer's instructions to attach any additional securing hardware, such as screws or clips, to ensure the monograms stay in place.
Finishing Touches: Once the new monograms are securely in place, step back and inspect the installation for proper alignment and adhesion. Clean the surrounding area, if needed, to remove any fingerprints or smudges.
It's important to note that the specific steps and techniques may vary depending on the design of the Bullet Standard monograms and the model of your Royal Enfield motorcycle. If you are unsure or uncomfortable performing the replacement yourself, it's recommended to consult a professional mechanic or take your motorcycle to an authorized Royal Enfield service center for assistance.