+3 votes
in Suzuki Gixxer by
edited by

Your answer

Your name to display (optional):
Privacy: Your email address will only be used for sending these notifications.
+2 votes
by

When starting your Suzuki Gixxer after it has been sitting idle for a month, it's important to follow a few steps to ensure a smooth start and minimize any potential issues. Here's a guide to help you:

  1. Check the Fuel: Ensure that you have fresh fuel in the tank. If the fuel is old or has been sitting for a long time, it may have degraded and can cause starting problems. If necessary, drain the old fuel and refill the tank with fresh fuel.

  2. Battery Check: Check the battery to ensure it has sufficient charge. If the battery voltage is low, it may struggle to start the bike. If needed, charge the battery using an appropriate charger or consider jump-starting the bike with the help of another vehicle or a portable jump starter.

  3. Inspect Fluids: Check the oil level and coolant level (if applicable) to ensure they are at the correct levels. Top up if necessary, following the manufacturer's recommendations.

  4. Lubrication: Apply a small amount of lubricating oil to the chain to prevent it from rusting and ensure smooth operation.

  5. Fuel System Priming: Depending on the model, your Gixxer may have a fuel pump. Turn the ignition key to the "On" position without starting the engine. This will allow the fuel pump to prime and circulate fuel through the system. Repeat this process a few times to ensure fuel reaches the engine.

  6. Choke or Enrichener: If your Gixxer has a choke or enrichener (a lever or knob usually located near the carburetor or fuel injection system), engage it to enrich the air-fuel mixture for easier starting. Follow the manufacturer's instructions for proper usage.

  7. Ignition: Turn the key to the "Start" position or press the starter button, while holding the clutch lever (if applicable). Give the bike a few seconds to start, and avoid excessive cranking to prevent battery drain.

  8. Warm-Up: Once the engine starts, allow it to warm up for a few minutes before riding. This allows the oil to circulate properly and ensures smoother operation.

By following these steps, you should be able to start your Suzuki Gixxer smoothly after it has been idle for a month. If you encounter any issues or the bike doesn't start, it's recommended to consult the owner's manual or seek assistance from a qualified mechanic.

Welcome to Askmotopros Q&A, where you can ask any question about motorcycles
...