The Yamaha RX135 is a classic motorcycle that typically comes with a fuel gauge or a fuel level indicator. However, if your particular model does not have a fuel gauge, you can still check the petrol level manually using the following steps:
Park the bike on level ground: Ensure that the motorcycle is parked on a flat surface to get an accurate reading.
Locate the fuel tank: The fuel tank of the Yamaha RX135 is typically located between the rider's seat and the handlebars. It is usually covered by a fuel tank cap.
Open the fuel tank cap: Remove the fuel tank cap by unlocking or unscrewing it, depending on the specific design of your model. Be careful not to spill any fuel during this process.
Use a flashlight (if necessary): If visibility inside the tank is limited, you can use a flashlight to get a better view of the fuel level.
Observe the fuel level: Look inside the fuel tank to check the fuel level. The tank may have a marking or a visible line indicating the maximum or recommended level. The fuel should ideally be above the reserve mark or at least a few centimeters below the top of the tank.
Estimate the petrol level: If there is no marking or indicator, you can estimate the fuel level by observing the height of the fuel in the tank.
Remember that it's always a good practice to keep track of your mileage and refuel the motorcycle regularly, especially if there is no fuel gauge. This helps prevent running out of fuel unexpectedly. Additionally, refer to the owner's manual or consult with a Yamaha service center for more specific information regarding your model's fuel level indicators and recommended maintenance procedures.