Yes, it is possible to push start a Harley Davidson motorcycle with a dead battery, although the process may vary slightly depending on the specific model and year of the motorcycle. Here's a general guide on how to push start a Harley Davidson:
Safety Precautions: Ensure that you are in a safe location and the path ahead is clear of any obstacles. It's also important to wear appropriate safety gear, including a helmet.
Prepare the Motorcycle: Make sure the ignition switch is turned to the "on" position. The clutch lever should be pulled in all the way, and the transmission should be in neutral.
Building Momentum: Have a friend help you push the motorcycle to gain some speed. Alternatively, you can run alongside the motorcycle while holding the handlebars and keeping your feet off the ground.
Release the Clutch: Once you have built enough speed, release the clutch lever quickly and smoothly. This will engage the engine and start it running.
Throttle Control: As soon as the engine starts, give a little bit of throttle to prevent it from stalling. You may need to adjust the throttle to maintain a smooth idle.
Charging the Battery: Once the motorcycle is running, it will start charging the battery. It's advisable to ride the motorcycle for a significant amount of time to allow the battery to recharge adequately.
Remember, push-starting a motorcycle with a dead battery should only be done as a temporary solution to get the motorcycle running. It's important to address the underlying battery issue and recharge or replace it as soon as possible. If you frequently experience battery problems, it's recommended to have the electrical system checked by a qualified mechanic to identify any potential issues.