+12 votes
in Bajaj Pulsar by
edited by

Your answer

Your name to display (optional):
Privacy: Your email address will only be used for sending these notifications.
+8 votes
by

To change the engine oil in a Bajaj Chetak, you can follow these general steps:

  1. Preparation:

    • Ensure you have the necessary tools, including a wrench, drain pan, funnel, and new engine oil.
    • Park your Bajaj Chetak on a flat and level surface.
    • Allow the engine to cool down to avoid any potential burns from hot oil.
  2. Locate the drain bolt:

    • Look for the engine oil drain bolt on the bottom side of the engine crankcase. It is typically located near the bottom of the engine, beneath the engine oil sump.
  3. Drain the old engine oil:

    • Place the drain pan beneath the drain bolt to catch the oil.
    • Loosen and remove the drain bolt using a wrench.
    • Allow the old oil to completely drain out into the drain pan.
    • Once the oil has drained, inspect the drain bolt washer for any damage or wear. If necessary, replace it with a new washer.
  4. Replace the drain bolt:

    • Clean the drain bolt thoroughly to remove any debris or old oil.
    • Apply a thin layer of oil on the drain bolt washer.
    • Reinstall the drain bolt and tighten it securely, but avoid overtightening.
  5. Locate the oil filler cap:

    • Find the oil filler cap on the top side of the engine, typically located near the rear part of the engine.
    • Remove the oil filler cap.
  6. Add new engine oil:

    • Using a funnel, carefully pour the recommended amount and type of new engine oil into the oil filler opening. Refer to your Bajaj Chetak's user manual for the specific oil type and capacity.
    • Pour the oil slowly and check the oil level using the dipstick (if equipped) or by observing the oil level window (if your Chetak has one).
    • Avoid overfilling, as it can lead to oil leaks and potential engine damage.
  7. Replace the oil filler cap:

    • Clean the oil filler cap and ensure it is free of any debris.
    • Reinstall the oil filler cap securely.
  8. Clean up:

    • Wipe off any spilled oil and ensure the area around the drain bolt and oil filler cap is clean.

Remember to dispose of the used engine oil responsibly by taking it to a designated recycling center or a service station that accepts used oil.

Please note that these steps are general guidelines, and it's always recommended to consult your Bajaj Chetak's user manual for specific instructions and recommendations provided by the manufacturer.

Welcome to Askmotopros Q&A, where you can ask any question about motorcycles
...