To adjust the passing lamps on a Harley-Davidson motorcycle, you can follow these general steps:
Park your motorcycle on a level surface and turn off the engine.
Locate the adjustment screws or bolts on the passing lamps. These are typically located on the backside or underside of the lamp housing.
Use a suitable tool, such as a screwdriver or Allen wrench, to loosen the adjustment screws or bolts. This will allow you to adjust the position of the passing lamps.
With the adjustment screws or bolts loosened, you can manually move the passing lamps to the desired position. You can adjust the angle and direction of the light beam.
Once you have adjusted the lamps, tighten the adjustment screws or bolts securely to hold them in place. Make sure they are tightened enough to prevent any movement or vibration while riding.
Repeat the adjustment process for the other passing lamp if applicable.
After adjusting both lamps, turn on your motorcycle's ignition and activate the passing lamps. Verify that the light beams are aligned properly and that they provide adequate illumination in the desired direction.
It's important to consult your motorcycle's owner's manual or any specific instructions provided by the manufacturer for the exact procedure and any additional considerations related to adjusting passing lamps on your particular Harley-Davidson model.