To remove the oil filter on a Harley Davidson motorcycle, follow these steps:
Gather the necessary tools and materials: You will need an oil filter wrench (specifically designed for motorcycles), a drain pan to catch any oil that may spill, and a clean rag or towel.
Preparation: Before removing the oil filter, it's a good idea to warm up the engine by running it for a few minutes. Warm oil flows more easily and can help with the removal process.
Locate the oil filter: The oil filter is typically located on the front or side of the engine, depending on the specific model of your Harley Davidson motorcycle. It is a cylindrical metal or plastic component with a threaded end.
Position the drain pan: Place the drain pan directly below the oil filter to catch any oil that may spill during the removal process.
Loosen the oil filter: Using an oil filter wrench, grip the oil filter firmly. Ensure that the wrench is securely positioned around the body of the filter. Turn the filter counterclockwise (lefty-loosey) to loosen it. Initially, it may require some force to break the seal.
Remove the oil filter: Once the oil filter is loosened, continue to turn it by hand until it can be fully removed. Be cautious as the filter may still contain some residual oil.
Drain the oil filter: With the filter removed, allow any remaining oil inside it to drain into the drain pan. This helps minimize oil spillage during disposal.
Clean the filter mounting surface: Use a clean rag or towel to wipe the filter mounting surface clean. Ensure that any remnants of the old filter's rubber gasket or seal are removed, providing a clean surface for the new filter.
Prepare the new oil filter: Before installing the new oil filter, lightly coat the rubber gasket or seal on the new filter with a small amount of fresh oil. This helps ensure a proper seal and makes it easier to remove during the next oil change.
Install the new oil filter: Carefully thread the new oil filter onto the mounting surface by hand. Turn it clockwise (righty-tighty) until it is snug. Avoid overtightening, as it may lead to difficulties during future removal.
Final checks: Double-check that the oil filter is securely installed and properly tightened. Wipe off any excess oil from the filter and surrounding area.
Once the new oil filter is installed, you can proceed with adding fresh oil to the motorcycle as per the manufacturer's recommendations. Be sure to dispose of the old oil filter and any collected oil in an appropriate and environmentally friendly manner.