To start a Harley Davidson motorcycle without using the electric starter, you can follow these steps:
Ensure the motorcycle is in neutral: Make sure the gear is in the neutral position. You can verify this by checking if the neutral light indicator on the instrument panel is illuminated.
Turn on the ignition: Insert the key into the ignition switch and turn it to the "On" position. This will power up the motorcycle's electrical system.
Activate the fuel system: Most Harley Davidson motorcycles have a fuel petcock or switch that needs to be turned on. Locate the fuel petcock or switch, typically located on the left side of the motorcycle near the gas tank, and ensure it is in the "On" position.
Prime the engine (if necessary): Some older models may require priming the engine to ensure fuel reaches the carburetor or fuel injection system. If your motorcycle requires priming, follow the specific instructions in the owner's manual. Newer models with fuel injection usually don't require priming.
Set the enrichener (choke): If the engine is cold, you may need to set the enrichener or choke to help with starting. The enrichener is usually a lever or knob near the carburetor. Pull it fully out to engage the choke position.
Get into the starting position: Make sure you are straddling the motorcycle, with your feet on the ground and your hand on the clutch lever. Keep the motorcycle balanced and stable.
Kick-start the motorcycle: Locate the kick-start lever on the right side of the motorcycle. Use your leg to push it downward with a smooth and firm motion. Apply a strong kick to generate enough force to turn the engine over.
Find the right balance: It may take a few attempts to find the right balance between throttle, enrichener, and the kick-start motion. Experiment with the throttle and enrichener positions as you kick-start the motorcycle.
Keep trying: Repeat the kick-starting process until the engine ignites. Once the engine starts, release the enrichener or choke gradually as the engine warms up.
It's important to note that kick-starting a Harley Davidson motorcycle requires physical effort and coordination. If you are unfamiliar with kick-starting or have any concerns, it's recommended to consult your motorcycle's owner's manual or seek assistance from a Harley Davidson dealer or a qualified motorcycle mechanic.