Changing a rear tire on a Harley-Davidson FLHTCUSE3 110 Screamin Eagle motorcycle requires proper tools, mechanical knowledge, and experience. It's important to note that tire changing can be a complex task, and if you're not confident in your abilities, it's recommended to have the tire changed by a professional motorcycle technician. However, here is a general overview of the steps involved:
Preparation:
- Ensure you have the necessary tools, including a motorcycle lift or jack, a tire iron or wrench, and a bead breaker tool.
- Place the motorcycle on a stable surface and secure it using straps or a motorcycle wheel chock.
- Remove any accessories or components that may obstruct the tire removal process, such as saddlebags or exhaust pipes.
Deflate the Tire:
- Remove the valve core from the valve stem to release the air pressure in the tire.
- Use a bead breaker tool to loosen the tire from the rim. This tool helps break the bead seal between the tire and the rim.
Remove the Axle and Brake Caliper:
- Loosen the axle nut on the rear wheel using an appropriate wrench or socket.
- Loosen the rear brake caliper mounting bolts and slide the caliper off the rotor. Be cautious not to damage the brake line.
Remove the Rear Wheel:
- Slide the axle out of the wheel hub, taking note of the arrangement of washers and spacers.
- Gently lower the wheel to the ground, being mindful of the brake rotor and other components.
Tire Replacement:
- Place the wheel securely in a wheel stand or clamp it into a tire-changing machine.
- Use tire irons or tire-changing tools to carefully remove the old tire from the wheel rim.
- Mount the new tire onto the rim, ensuring it is properly aligned and seated evenly.
Reinstall the Rear Wheel:
- Lift the wheel back onto the motorcycle, aligning it with the swingarm.
- Insert the axle through the wheel hub, reassembling the washers and spacers in the correct order.
- Tighten the axle nut to the recommended torque specification.
Reinstall the Brake Caliper and Axle:
- Slide the brake caliper back onto the rotor, aligning the mounting holes.
- Tighten the brake caliper mounting bolts securely.
- Reinstall the valve core into the valve stem and inflate the tire to the recommended pressure.
Final Checks:
- Double-check all connections and fasteners for proper tightness.
- Spin the wheel to ensure it rotates freely without any interference.
- Test the brakes to ensure they engage and release properly.
Remember, this is a general overview, and the specific steps may vary depending on the exact model and any additional features or accessories on your Harley-Davidson FLHTCUSE3 110 Screamin Eagle motorcycle. Consult your motorcycle's owner manual for detailed instructions and specifications or consider seeking assistance from a professional motorcycle technician if you are uncertain about any aspect of the tire-changing process.