To reset the oil life on a Honda CR-V, you can follow these steps:
Turn on the ignition: Turn the ignition key to the "ON" position without starting the engine. Make sure the trip meter is showing the regular odometer reading, not the trip A or B readings.
Locate the trip meter button: Look for the button on the instrument cluster that switches between the trip meter and the regular odometer reading. It is usually located near the speedometer or on the instrument panel.
Press and hold the trip meter button: Press and hold the trip meter button for about 10 seconds until the maintenance light begins to flash or the oil life percentage appears on the display.
Reset the oil life: Once the maintenance light starts flashing or the oil life percentage is displayed, release the trip meter button, then quickly press and hold it again. Keep holding the button until the maintenance light stops flashing or the oil life resets to 100%. This typically takes a few seconds.
Confirm the reset: After releasing the trip meter button, check the instrument cluster display to ensure that the maintenance light has stopped flashing or the oil life has reset to 100%. This confirms that the oil life reset was successful.
It's worth noting that the exact procedure may vary slightly depending on the model year and trim level of your Honda CR-V. If you encounter any difficulties or if the oil life does not reset as expected, referring to the vehicle's owner's manual or contacting a Honda dealership for assistance can provide more specific instructions for your particular model year.