+108 votes
in Honda Motorcycles Scooters by
edited by

Your answer

Your name to display (optional):
Privacy: Your email address will only be used for sending these notifications.
+17 votes
by

To reset the TPMS (Tire Pressure Monitoring System) light on your Honda, you can follow these general steps:

  1. Check tire pressure: First, ensure that all the tires on your Honda are properly inflated to the recommended pressure. You can find the correct tire pressure values in your vehicle's owner's manual or on a sticker located on the driver's side door jamb or inside the fuel filler door.

  2. Turn on the ignition: Insert the key and turn it to the "ON" position, but do not start the engine. Make sure all doors are closed.

  3. Locate the TPMS reset button: Depending on the model and year of your Honda, the TPMS reset button may be located under the dashboard or inside the glove box. Refer to your vehicle's owner's manual to find the exact location.

  4. Press and hold the TPMS reset button: Press and hold the TPMS reset button for approximately 10 seconds or until the TPMS light blinks twice. Release the button.

  5. Drive the vehicle: Start the engine and drive your Honda at speeds above 15 mph (24 km/h) for at least several minutes. During this time, the TPMS sensors will communicate with the vehicle's system and reinitialize.

  6. TPMS light should go off: After driving for a sufficient distance, the TPMS light should turn off, indicating that the system has been reset and is now monitoring the tire pressures.

It's important to note that the exact procedure for resetting the TPMS light may vary depending on the Honda model and year. If you're unable to locate the TPMS reset button or encounter any difficulties, I recommend referring to your vehicle's owner's manual or contacting a Honda dealership for model-specific instructions or assistance.

Welcome to Askmotopros Q&A, where you can ask any question about motorcycles
...