To change the oil of a TMX 125 Alpha, you can follow these general steps:
Gather the necessary tools and materials: You will need a new oil filter, a wrench or socket set, a drain pan, a funnel, and the appropriate type and quantity of engine oil as recommended by the manufacturer.
Preparation: Ensure that the motorcycle is on a level surface and the engine is cool. This allows the oil to settle and ensures safer handling during the oil change process.
Locate the drain plug: The drain plug is typically located on the bottom of the engine. Consult the owner's manual or refer to the manufacturer's guidelines for the exact location of the drain plug on the TMX 125 Alpha.
Drain the old oil: Place the drain pan beneath the drain plug to catch the old oil. Loosen the drain plug with the appropriate wrench or socket and allow the oil to drain completely. Once the oil has drained, re-tighten the drain plug securely.
Replace the oil filter (if applicable): If your TMX 125 Alpha is equipped with an oil filter, remove the old oil filter using an appropriate wrench or filter removal tool. Install a new oil filter by hand, ensuring it is tightened according to the manufacturer's specifications. Lubricate the rubber gasket of the new oil filter with a small amount of fresh oil before installation.
Refill with new oil: Locate the oil filler cap on the engine, usually located on the top or side. Remove the cap and insert a funnel. Slowly pour the recommended amount of fresh engine oil into the engine. Refer to the owner's manual for the correct oil capacity and specifications.
Check oil level: With the motorcycle on level ground, check the oil level using the dipstick or sight glass, depending on the model. Ensure the oil level is within the recommended range. If necessary, add more oil in small increments and recheck until the level is correct.
Replace the oil filler cap and start the engine: Once the oil level is correct, securely replace the oil filler cap. Start the engine and let it run for a few minutes to circulate the new oil throughout the engine.
Check for leaks and recheck oil level: After running the engine, check for any signs of oil leaks around the drain plug or oil filter. Additionally, recheck the oil level with the dipstick or sight glass and adjust as necessary.
It's important to note that these are general guidelines, and the specific steps may vary slightly depending on the TMX 125 Alpha model and any additional recommendations provided by the manufacturer. It's always recommended to consult the owner's manual or seek guidance from a qualified technician if you are unsure about any steps or specifications during the oil change process.