To change or shift the gear lever on your Honda Unicorn ABS 2019 model from a front gear shifter to a heel toe shift lever, you can follow these steps:
Ensure that the bike is parked on a level surface and the engine is turned off.
Locate the gear lever on the left side of the motorcycle. It is usually connected to the gearbox and has a linkage that extends towards the front of the bike.
Locate the fasteners or bolts that secure the gear lever to the linkage. These bolts may vary depending on the specific design of your motorcycle.
Use the appropriate tools, such as a wrench or socket set, to loosen and remove the bolts holding the gear lever in place. Make sure to keep track of any washers or spacers that may be present.
Once the bolts are removed, you can detach the old gear lever from the linkage.
Take the new heel toe shift lever that you obtained and align it with the linkage. Ensure that it is positioned correctly for comfortable shifting with your foot.
Insert the bolts through the holes in the heel toe shift lever and into the corresponding holes in the linkage.
Tighten the bolts securely using the appropriate tools. Be careful not to overtighten, as it may cause damage to the lever or the linkage.
Check the movement of the new gear lever by manually shifting through the gears. Make sure it engages smoothly and securely.
Once you are satisfied with the installation and functionality of the new gear lever, you can start the engine and take a short test ride to confirm that everything is working as expected.
If you are not confident in performing this task yourself, it is recommended to seek assistance from a qualified mechanic or technician who has experience with motorcycle maintenance. They will be able to guide you through the process or perform the installation for you.