The Rusi Classic 250 is a motorcycle model manufactured by Rusi Motors in the Philippines. It is always recommended to consult the owner's manual or refer to the manufacturer's instructions for your specific model. Here are the general steps involved:
Gather the necessary tools and materials: You will typically need a socket wrench or spanner, an oil filter wrench (if applicable), a drain pan, a new oil filter, and the appropriate type and quantity of engine oil as recommended by the manufacturer.
Warm up the engine: Start the motorcycle and let it idle for a few minutes. This will help warm up the engine oil, making it easier to drain.
Locate the drain plug: The drain plug is usually located at the bottom of the engine. Consult the owner's manual or refer to the manufacturer's instructions to identify the specific location and size of the drain plug.
Place the drain pan: Position the drain pan under the drain plug to catch the old oil.
Drain the oil: Use a socket wrench or spanner to loosen and remove the drain plug. Allow the old oil to drain completely into the drain pan. Be cautious as the oil may be hot.
Replace the drain plug: Once the oil has drained, clean the drain plug, apply a new crush washer if necessary, and reattach the drain plug securely.
Change the oil filter: If your Rusi Classic 250 is equipped with an oil filter, use an oil filter wrench to remove the old filter. Apply a thin film of oil to the rubber gasket of the new oil filter, then install the new filter hand-tightened or as per the manufacturer's instructions.
Refill with new oil: Locate the oil fill cap or dipstick on your motorcycle's engine. Remove the cap or dipstick and use a funnel to pour in the recommended amount and type of new engine oil. Check the level using the dipstick if necessary.
Secure the oil fill cap or dipstick: Ensure the oil fill cap or dipstick is properly secured.
Dispose of the old oil responsibly: Transfer the used oil from the drain pan to a suitable container for proper disposal or recycling at a designated oil recycling facility.
It's important to follow the manufacturer's instructions and recommendations for oil type, quantity, and service intervals specific to your Rusi Classic 250 motorcycle. If you are unsure or have any concerns, it's advisable to consult a qualified mechanic or refer to a Rusi dealership for assistance.