+22 votes
in Honda Motorcycles Scooters by
edited by

Your answer

Your name to display (optional):
Privacy: Your email address will only be used for sending these notifications.
+16 votes
by

To read the engine codes on your 2013 Honda CBR 500R when the engine light is on, you can use the built-in Diagnostic Trouble Code (DTC) retrieval function. Here's a general procedure:

  1. Locate the Diagnostic Connector: The diagnostic connector is usually located under the seat or near the battery of your motorcycle. It is a rectangular-shaped connector with multiple pins.

  2. Turn on the Ignition: Make sure the ignition switch is in the "ON" position without starting the engine. The engine light should be illuminated.

  3. Connect the Service Check Connector: Using a jumper wire or paperclip, connect the two-pin service check connector within the diagnostic connector. The service check connector is typically a blue two-pin connector.

  4. Observe the Engine Light: Once the service check connector is connected, the engine light will start flashing in a pattern to indicate the stored trouble codes.

  5. Count the Flashes: Count the number of long flashes (representing the first digit) and short flashes (representing the second digit) of the engine light. For example, a long flash followed by three short flashes would indicate a trouble code "13".

  6. Record the Codes: Note down the sequence of flashes and their corresponding digits. Multiple codes may be present, so make sure to record all of them.

  7. Interpret the Codes: Refer to the service manual or Honda's official documentation for your specific CBR 500R model to interpret the recorded codes. The manual will provide a list of codes along with their corresponding descriptions to identify the specific issues.

  8. Address the Issues: Once you have identified the trouble codes, you can consult with a qualified mechanic or refer to the service manual for guidance on troubleshooting and resolving the specific issues indicated by the codes.

It's worth noting that the above procedure provides a general overview, and the specific steps may vary slightly for your particular Honda CBR 500R model. For accurate and detailed instructions, it is recommended to refer to the owner's manual or consult an authorized Honda dealership or service center for assistance.

Welcome to Askmotopros Q&A, where you can ask any question about motorcycles
...